| |

Cost-Effective 10/100/1000 Media Converter with Power over Ethernet (PoE or PoE+)

OmniConverter® GPoE+/SE

Part Number: 9499N-0-19W

Add to Quote

Description
Specifications
Documents

OmniConverter® GPoE+/SE : 1 x 10/100/1000 Mbps RJ-45 PoE+ to 1 Gbps Fiber, 1 x SFP, DC 2-Pin Terminal, Wide Temperature -40 to 60 deg

Specifications

Description	OmniConverter GPoE+/SE 10/100/1000BASE-T to 1000BASE-X Fiber Media Converter with PoE+
Standard Compliances	IEEE 802.3, IEEE 802.3af (15.40 watts max), IEEE 802.3at (30 watts max)
Regulatory Compliances (Pending)	Safety: UL 62368-1, UL 60950-1, IEC 62368-1, IEC 60950-1, EN 62368-1, EN 60950-1, CAN/CSA C22.2 No. 62368-1-14, CAN/CSA C22.2 No. 60950-1, CE Mark, UKCA EMC: EN 55032/24 CE Emissions/Immunity, IEC 61000-6-4 Industrial Emissions, IEC 61000-6-2 Industrial Immunity EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV (DC models), IEC 61000-4-4 EFT: Power: 1 kV; Signal: 1 kV (AC models), IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV (DC models), IEC 61000-4-5 Surge: Power: 1 kV Line/Line; 2 kV Line/Gnd; Signal: 2 kV (AC models), IEC 61000-4-6 CS: Signal: 10 V, IEC 61000-4-8 (Magnetic Field) 30A/m, IEC 61000-4-11 (Voltage Dips, interrupts) IP Rating: IP30D Protection ACT: TAA, BAA,NDAA
Environmental	RoHS, WEEE, REACH
PoE Power Modes	IEEE Alterative A (Alt A)
Frame Size	Up to 10,240 bytes
Port Types:	Copper: 10/100/1000BASE-T (RJ-45) Fiber: 1000BASE-X (SFP)
Cable Types	Copper: EIA/TIA 568A/B, Cat 5 UTP and higher Fiber: Multimode: 50/125, 62.5/125µm Single-mode: 9/125µm
AC Power Requirements (Models with AC/DC Adapters)	100 - 240VAC/50 to 60Hz 0.31A @ 120VAC (typical)
DC Power Requirements (Models with DC Terminals)	+/-46 to +/-57VDC; 0.59A @ 56VDC 2 Pin Terminal (isolated)
DC Power Requirements (Models with DC Terminals)	A minimum of 50VDC is required to guarantee 25.5 watts at 100 meters on Cat 5 cable or better.
Dimensions (W x D x H)	3.8” x 4.8” x 1.0” (96.5 mm x 121.9 mm x 25.4 mm)
Weight	Module Only: 1.0 lbs.; 453.6 grams Module w/ Adapter: 1.8 lbs.; 816.4grams
Operating Temperature (See Temperature Derating Table)	Commercial: 0 to 50°C Wide: -40 to 60°C (-20°C AC cold start) Storage: -40 to 80°C
Humidity	5 to 95% (non-condensing)
Altitude	-100m to 4,000m
MTBF (hours)	Module Only: 681,000 AC/DC Adapter: 100,000
Warranty	Lifetime warranty with 24/7/365 free Technical Support

Power / Voltage Requirements and Specifications per IEEE


Description	IEEE 802.3af PoE	IEEE 802.3at PoE+
Power Supply Voltage Range	46.0 to 57.0 VDC	51.0 to 57.0 VDC
Voltage Range at PSE port Output	44.0 to 56.0 VDC	50.0 to 56.0 VDC
Maximum Power from PoE/PSE port	15.4 watts	30 watts
Minimum Voltage at PoE/PD port input*	37.0 VDC	42.5 VDC
Minimum Power at PoE/PD port*	12.95 watts	25.5 watts

OmniConverter GPoE+/SE (Data Sheet)

OmniConverter GPoE+/SE (User Manual)

Media Converter Comparison App Note (The Application Note provides a cross reference from the Previous/Old models to the Enhanced models)